Online Message

CONTACT US

message-img
  • Safety Practices for Machining Copper Beryllium Alloys

    In addition, processing copper beryllium alloys shall be conducted in accordance with the Beryllium Standard for General Industry (29 CFR 1910.1024) established by the Occupational Safety and Health Administration (OSHA) which includes a Permissible Exposure Limits (PEL) of 0.2 microgram beryllium per cubic meter (0.2 µg/m3) as an 8-

    Details >
  • Beryllium Copper Alloys

    Because they are copper base alloys: Beryllium Copper exhibit a high electrical conductivity ranges from 22 to 70% IACS depending on the alloys and temper. They are non-magnetic They have excellent corrosion resistance and are ideal for use in marine and industrial environments. They

    Details >
  • Beryllium copper Wikipedia

    Beryllium copper is non-sparking but physically tough and nonmagnetic, fulfilling the requirements of ATEX directive for Zones 0, 1, and 2. Beryllium copper screwdrivers, pliers, wrenches, cold chisels, knives, and hammers are available for environments with explosive hazards, such as

    Details >
  • Copper Beryllium Requirements soby

    Copper Beryllium Requirements. Ngk Berylco Beryllium Copper Products. BERYLCO Beryllium Copper Products. The oversize for each thickness is an accommodation over the nominal size to minimize scrap loss in machining. Other thickness can be made available as required.

    Details >
  • Guide To Beryllium Copper Michigan State University

    conductivities of beryllium copper promote its use in appli-cations requiring heat dissipation and current carrying capacity. Electrical conductivity is listed with mechanical properties in the Product Guide section of this book. Physical Properties The thermal expansion coefficient of beryllium copper is

    Details >
  • ASTM B196 / B196M 18 Standard Specification for

    This specification establishes the requirements for rods and bars in straight lengths of copper-beryllium alloys with Copper Alloy UNS Nos. C17000, C17200, and C17300. The material for manufacture shall be cast and worked to such purity and soundness as to be suitable for processing by hot working, cold working, and annealing to produce a uniform wrought structure and specified temper in the finished

    Details >
  • Beryllium Copper Chemical Composition & Hardness Specs

    Beryllium Copper Physical Properties 25 C17200 Yield Strength . 10 8 cycles. ksi. Hardness ; Temper Heat Treatment Tensile Strength ksi 0.2% offset ksi Elongation % Fatigue Strength. Diamond Pyramid Rockwell B or C Rockwell Superficial Electrical Conductivity % IACS ; A Dead Soft (TB00)--60-76: 28-36: 35-65: 30-35: 90-144: B45-78: 30T46-67: 15-19: A Planished (TB00)--60-78

    Details >
  • Beryllium Overview Occupational Safety and Health

    15-08-2020· Beryllium alloys are classified into two types: high beryllium content (up to 30% beryllium) and low beryllium content (2 3% beryllium). Copper-beryllium alloy is commonly used to make bushings, bearings, and springs. Beryllium is also found as a trace metal in slags and fly ash.

    Details >
  • ASTM B194 15 Standard Specification for Copper

    This specification establishes the requirements for plates, sheets, strips, and rolled bars of copper-beryllium alloy with Copper Alloy UNS Nos. C17000 and C17200. Materials shall be processed by the following conditions: solution heat treatment, solution heat treatment and cold working, precipitation heat treatment, and mill hardening.

    Details >
  • Guide To Beryllium Copper Michigan State University

    Beryllium copper high strength alloys are less dense than conventional specialty coppers, often providing more pieces per pound of input material. Beryllium copper also has an elastic modulus 10 to 20 percent higher than other specialty copper alloys. Strength, resilience, and elastic properties make beryllium copper the alloy of choice. 6

    Details >
  • ASTM B196 / B196M 18 Standard Specification for

    This specification establishes the requirements for rods and bars in straight lengths of copper-beryllium alloys with Copper Alloy UNS Nos. C17000, C17200, and C17300. The material for manufacture shall be cast and worked to such purity and soundness as to be suitable for processing by hot working, cold working, and annealing to produce a uniform wrought structure and specified temper in the

    Details >
  • 6682 Beryllium Handling & Exposure

    3.0 Inventory. 3.1 Beryllium Inventory · Beryllium copper alloys used in waveguide assemblies. · Beryllium & beryllium oxide targets and windows used in the beamline in the CEBAF injector and experimental halls. 3.2 Control of Beryllium Inventory · Any beryllium purchases must follow the process outlined in ES&H Manual Chapter 6610 Appendix T2 Chemical Requisitioning and Receiving.

    Details >
  • Beryllium Hazard: An Overview on Regulation

    15-07-2020· Beryllium, a metal that is stronger than steel and lighter than aluminum, is used commonly as an alloy with copper, aluminum, magnesium or nickel. It is used in many applications because of its high heat capacity. The high heat necessary to form it can lead to the generation of extremely small particulates known as fumes.

    Details >
  • Beryllium Bronze Copper Beryllium Characteristics and

    Copper beryllium tool. The bronzes are a family of copper-based alloys traditionally alloyed with tin, but can refer to alloys of copper and other elements (e.g. aluminum, silicon, and nickel).Bronzes are somewhat stronger than the brasses, yet they still have a high degree of corrosion resistance. Generally they are used when, in addition to corrosion resistance, good tensile properties are

    Details >
  • Beryllium Copper Alloys High Strength Spring Copper

    The commercial grades of beryllium copper contain 0.4 to 2.0 percent beryllium. The small ratio of beryllium to copper creates a family of high copper alloys with strength as high as alloy steel. The first of the two families, C17200 and C17300,includes high strength with moderate conductivity, while the second family, C17500 and C17510,offers high conductivity with moderate strength.

    Details >
  • Alert: Workplace Beryllium Exposure Ontario Ministry of

    Legal Requirements The Regulation respecting Control of Exposure to Biological or Chemical Agents [ R.R.O. 1990, Reg. 833, ] sets an Occupational Exposure Limit requiring employers to limit the exposure of workers to beryllium and its compounds to the value set out in Table 1 of the Regulation.

    Details >
  • Beryllium Substance Information ECHA

    Substance identity Substance identity. The ‘Substance identity’ section is calculated from substance identification information from all ECHA databases. The substance identifiers displayed in the InfoCard are the best available substance name, EC number, CAS

    Details >
  • Is machining beryllium copper hazardous? CR4

    28-10-2009· IARC lists beryllium as a known human carcinogen (Group 1) and notes that the work environment of workers involved in refining, machining and producing beryllium metal was associated with an increased risk of lung cancer, "the greater excess was in workers hired before 1950 when exposures to beryllium in the work place were relatively uncontrolled and much higher than in

    Details >

News & Cases

We provide quality and efficient solutions to our global customers